Gears for Food and Beverage Machinery
Mixers, conveyors, fillers and packaging machines run fast, clean and often around the clock. We manufacture quiet, accurate gears and shafts for food and beverage equipment builders and plants.
Clean, Quiet and Running Around the Clock
Food and beverage plants run high-speed lines for long shifts, with frequent washdowns and strict hygiene. Gears in mixers, conveyors, filling and packaging machines must run quietly, reliably and with minimal maintenance.
Nika Gears manufactures precision gears, worm sets, bevel gears and splined shafts for food machinery builders and plant maintenance – accurate enough for smooth, quiet running and consistent from batch to batch.
Typical requirements
- Dutycontinuous, high cycle
- Environmentwashdown, humidity
- Typical gearsbevel, worm, helical, spur
- Prioritylow noise, reliability
- Materials16MnCr5, 20MnCr5, stainless on request
- SupplyOEM series and spares
Where Do Our Gears Run in Food Plants?
Mixers and Kneaders
Bevel and planetary stages in dough mixers, kneaders, agitators and blenders.
- Bevel and planetary sets
- Quiet running
Conveyors and Elevators
Worm and helical gears and drive shafts for belt, chain and bucket conveyors and spiral elevators.
- Worm gear sets
- Series spare parts
Filling and Packaging Machines
Small precision spur and helical gears, cluster gears and indexing drives for fillers, cappers and packaging lines.
- Ground precision gears
- Indexing drives
Which Materials for Food Machinery Gears?
| Application | Typical choice |
|---|---|
| Precision machine gears | 16MnCr5 or 20MnCr5 case hardened and ground |
| Mixer bevel sets | 18CrNiMo7-6 case hardened |
| Conveyor worm drives | case-hardened ground worm, CuSn12 bronze wheel |
| Washdown areas | stainless steels or protective coatings to drawing |
Final material and heat treatment follow your drawing. We advise when the specification is open.
Related industries: sugar · chemical · industrial machinery · all industries
Food Machinery Gear Questions
Can you make stainless steel gears?
Yes, on request, for parts exposed to washdown or product. Stainless gears have lower load capacity, so we advise on the trade-off.
Do you supply small precision gears?
Yes, small spur, helical and cluster gears, ground when the accuracy grade requires it.
Can you supply spare gears for older food machines?
Yes, from drawings or measured samples.
Gears for Food and Beverage Equipment
Food and beverage machinery combines high speed, long running hours and strict cleanliness. Bakeries, dairies, breweries, bottling plants and meat processors all depend on gear drives that run quietly and rarely need attention.
Mixing and processing
Dough mixers, kneaders and agitators use bevel gears to turn the drive vertically and planetary stages for compact, high-torque mixing. Smooth, accurately cut gears keep noise low in production halls.
Conveying
Belt, chain and bucket conveyors and spiral elevators often run on worm gearboxes, which are compact and quiet and can hold position when stopped. We manufacture matched worm and bronze wheel sets for these drives.
Filling and packaging
Fillers, cappers, labellers and packaging machines need small, precise spur and helical gears, often ground, plus cluster gears and indexing drives. Batch consistency matters because machine builders order the same parts again and again.
Material choices
Most food machinery gears sit inside closed gearboxes and use standard case-hardening steels. Where gears are exposed to washdown or product, stainless steels or protective coatings can be specified – we advise on load capacity and durability.
Nika Gears manufactures food machinery gears in Türkiye for builders and plants across Europe. Send your drawing.
Send a gear drawing. Get an answer within 24 hours.
Include the PDF or STEP file, module or DP, number of teeth, material, heat treatment, accuracy grade and quantity. We reply with questions or a quotation.